Before & After

Painted Vinyl Floor Mat for My Foyer

March 08, 2017

Four years ago I blogged about the DIY foyer rug I made with some colourful fabric and some Polyurethane. The rug did its job for many years, but sadly time and foot traffic took its toll. While sweeping and mopping was able to get it mostly clean, over time the rug started to look a bit dingy and worn. I debated making another rug in the same way, but I couldn’t find any graphic colourful fabric I liked at a price I wanted to pay so I started looking for other options.

Last summer while I was visiting my parents my mom and I were browsing in a fancy kitchen store when I stumbled across these beautiful Vintage vinyl floor cloths by Spicher & Co. There were only two issues – I’d have to get a custom size which meant big $$$$, and the patterns they had were very traditional – not many that fit my desire for something bright and vibrant.
colourful striped rug in a foyer
Photo credit: Sian Richards; Chatelaine
A few months later I was bumbling around the internet and I found the image above. While the foyer is stunning (so bright and open!) it was the rug that drew my eye first. I loved the thick stipes in the vibrant hues. A bit of digging led me to the rug maker - Oliver Yaphe. The hand knotted construction of the rugs made them way too thick to fit under my front door (and the price was way too much for my wallet), but the image gave me a better idea of what I was looking for in terms of pattern and colour for my foyer.

After being inspired by the thick bright stripes I recalled the vinyl floor mats I had seen earlier and decided that I would attempt to make my own version if I could find suitable vinyl flooring. I needed the vinyl to be very thin, and I needed it to be as un-patterned as possible - most vinyl flooring has an embossed pattern to make it appear more like bricks or slate tiles - I didn't want that pattern to still be visible once I had painted it.

I looked at off-cuts, and even remnants and pieces at the Habitat for Humanity Restore, but nothing worked. Luckily I eventually found this vinyl at Home Depot - thin and the horizontal wood pattern would work with my planned horizontal stripes. With that worked out I turned my attention to picking my paint colours. I wish I could say that I was inspired by something in my home, but I cheated. I have a bunch of those 'paint inspiration' booklets and one from Para has five colours that reminded me of the ones in my inspiration rug, and even better I didn't have to spend the time carefully picking harmonious colours. Since I would need only a small amount of each colour I bought sample pots at Lowes.


Once all the materials were in hand, the steps were fairly simple, if a bit time consuming waiting for paint to dry. I used my dining room (aka: my workroom) for this project so it was bit in the way – a garage or other low traffic area would be better if you’re interested in trying it, but I’m not blessed with either. I first cut my vinyl to size using a straightedge and X-Acto knife. Then I primed it with some primer I had on hand from an earlier project. Next up was determining my pattern. I knew I wanted stipes of varying width, but I didn’t want just random sizes. My dad will be thrilled to know I used math to figure out a ratio that could work. Once the sizes of the stripes were determined I marked them using a pencil, and then taped off half of the stipes using painters tape. I painted between two to three coats of each colour using a small foam roller (darker colours needed an exra coat because my primer was white). Once those stripes were dry I peeled the tape up, and repeated the process to paint the other half of my stripes. There was a little seepage under the tape making my lines less crisp than I liked so I touched them up with a tiny paintbrush. The last step was three coats of Polycrylic in a satin finish.
striped painted floor mat from above

Painted floor mat with colourful stripes
I’ve been using my new vinyl rug since the end of November, and it’s held up really well against the stuff I’ve tracked in from outside with no chipping or scratches to the paint caused by little pebbles or damage caused by the water from melting snow off my winter boots. I reused my thin Ikea rug pad under the vinyl to prevent any movement of the rug, and the additional weight of my tulip table keeps it nicely secure.
Tulip table on a striped floor mat
My little experiment has worked so well I’m considering making another for my dining room, but for now I’m perfectly thrilled with how this one looks in my foyer.
stripes floor mat in a foyer

Striped floor mat on a wood floor

Before & After

DIY Gold Stripe Tray

July 18, 2014

When I was considering adding the tulip table to my foyer I wanted to have a little spot to corral the mail, my keys and other things when I come in the door. I knew a small tray would be ideal for that purpose, so I set out to find one that met my criteria – it needed to be rectangular, not too expensive, and it needed to have some colour given the table and the walls in my foyer are white.

To be honest I had absolutely no plans on DIYing anything, and I actually did find a lovely contender for the spot at HomeSense that was just $13. Then of course I went to the thrift store and found a tray for $1.99 and my plans changed.  Given its thrift store provenance the tray was predictably ugly, but it was the right size and shape and I knew that making it prettier would be easy. 
Thrift store tray before
I’ve been in LOVE with this tray forever, and if it had been the right size I may have been tempted to buy it for my foyer (but only if it also went on sale). Since the original wasn’t to be I decided to make my own version using my thrift store tray and spray paint I already had on hand.
Thrift store tray painted white with tape to make stripes
(Apologies for the bad cell phone picture)
After spraying the tray white I set out to mark off the pattern on the top of the tray using masking tape. I eyeballed the pattern and used a small piece of tape to help with the spacing between the lines.  I did have painters tape on hand, but it was too wide for the scale of my tray so I ended up using the regular masking tape (I use it in class to tape my drawings to the drafting table).
thrift store tray painted gold
Once the pattern was complete I sprayed the tray top and bottom with gold spray paint, and when it was dry I peeled off the tape and voilà – a gold stripe tray.
DIY gold stripe tray
There was some bleeding under the tape that more than likely wouldn't have occurred if I’d used painters tape, but I’m honestly not too concerned.
DIY gold stripe tray on a white table
Not bad for $2 right?

Before & After

Update your Kitchen Hardware in 5 Easy Steps

September 20, 2012

Update your kitchen hardware in 5 easy steps
Changing door hardware is one of the easiest ways to update a kitchen, or a piece of furniture. If you’re lucky your new hardware will be the same size as your old, so there will be no extra work involved, but on occasion your new pulls or handles may require you to break out your drill.

When I recently updated my kitchen hardware I needed to use my drill and I thought I’d share what worked for me in case you’d love to update yours, but have been a little scared to try given you have to drill holes in your kitchen cabinets!

Tools you’ll need:
  • Drill
  • Drill bit that is the size of your screw
  • Drill template (I used one from Ikea, but Home Depot, etc will carry them)
  • Masking tape
  • Sharpie
Steps
  1. Determine where you want your handles to go on your cabinets, and match that location to the holes on the drill template. Mark the holes you'll use for your new handles on the template  - I used a marker, but tape would work as well.
    Update your kitchen hardware in 5 easy steps - step 1
  2. My cabinets are glossy and I worried that the drill bit would be prone to sliding on the slick cabinet surface once I started drilling. To combat this I stuck a strip of masking tape to the cabinet where I was going to drill. This helped slow any lateral movement, and also made it easily visible if the bit was shifting so I could stop and correct it before I went too far.
    Update your kitchen hardware in 5 easy steps - step 2
  3. Use the drill template to mark where your holes will go. I used a sharpie as I was marking the masking tape I applied in the earlier step. You could also use a pencil if you aren’t using the tape and didn’t want to risk a permanent mark.
    Update your kitchen hardware in 5 easy steps - step 3
  4. Start drilling. I’ll be honest – this part was scary. I started on the cabinet that is the least noticeable in case I goofed. Start slowly and make sure the bit doesn’t drift off your mark. Once the hole has gotten started you can speed up a bit.
    Update your kitchen hardware in 5 easy steps - step 4
  5. Remove the making tape and attach your new hardware.
    Update your kitchen hardware in 5 easy steps - step 5
I did one door from start to finish at a time. I did this in case there was a problem it would mean I’d only ruined one door. The process for drawers is a little different, but the steps above will work – you’ll need to find the center of the drawer (measure twice to make sure) and mark your drill holes accordingly.

Have you ever drilled holes in your kitchen cabinets? Were you as scared as I was to try it?

Decorate

DIY - Upholstered Headboard With Nailhead Trim

December 14, 2011

Way back in another lifetime I built my headboard out of MDF and 2"x2" pieces of wood and then covered it with a couple of layers of cotton batting, and a piece of inexpensive white fabric. Fast forward quite a few years, and I was no longer thrilled with my headboard. The fabric had gotten rather dull looking, and I wished every time I saw it that I had something just a little more sophisticated.
My Headbord before
My headbord before
You may recall that I have a serious love for the Collete Bed at Crate&Barrel. A while ago when I was at King Textiles looking for some velvet for my mirror framing project, I spotted some fabric in their clearance section that sparked an idea. After quickly Googling on my phone the dimensions of a double bed I purchased several yards.
the back of my headboard
The back of my headboard
I put off this project for a couple of weeks as I was a little worried about pulling out all the staples that attached the original fabric to the headboard. Even though it was years ago, I still remember how cramped my hand got from using the staple gun, and I had visions of pulling staples for days. I needn't have worried - the staples came out quite easily with a pair of needle-nosed pliers.
Removing the staples
High-tech tools for removing staples
As I wasn't going to replace the batting, my next step was to lay out the new fabric, and make the necessary cuts to remove the extra. Next I started stapling.  My method was simple - a couple of staples in the top in the middle, and then pulled the fabric tight and stapled at the bottom in the middle. I then did the middle on each side. This ensured that fabric was tight in both directions before I stapled the rest of the top, bottom and sides. The top corners gave me a little trouble as I wanted to make them as smooth as possible. After some trial and error I ended up cutting out a triangle of fabric at each corner before folding it over and stapling. This would probably have been easier if my fabric wasn't so thick, but as it's a woven wool it got quite bulky in the corners.

Once the stapling was complete I flipped the headboard over, and started on the next phase of the project.

I had seen individual nail head tacks at Home Depot on several occasions, but the thought of having to nail in several hundred tacks kept me from recovering my headboard a long time ago. While perusing the Lee Valley Tools website one day I saw these nail head strips, and they were what I used. The beauty of this product is you only have to nail in every 5th nail - the rest are fake.
Laying out the nail strips
Laying out the nail strips
The next part required a bit of math as I wanted to ensure the nailhead trim detail was equally spaced across the top (to ensure that a real nail ended up at each end), but once I had that figured out the rest was fairly easy.

Here's the finished product:
Recovered headboard
close up of nail head detail
Newly recovered headboard
The finished product
Here's what this project cost:
For a total cost of $45.43 (tax. incl.) I'm quite pleased with the transformation.
Newly refinished headboard next to vintage lamp
Don't my rewired lamps look great next to it?
Mine doesn't have the fancy curved detail that the one at Crate&Barrel does, but given how much it cost to make I can overlook that little detail. What do you think? Is it almost as nice as the original?

Celebrations

DIY Dove Christmas Ornaments

December 01, 2011

I'm going to let you in on a little secret - I'm having a little trouble getting into the holiday spirit this year. I'm not sure what it is, but I just can't seem to get really excited about the holiday that is fast approaching. I own a little fake Christmas tree and a selection of ornaments and I fully intended to leave them in my storage locker for the holiday season until last week.

I was flipping through the November issue of Style At Home Magazine when I spotted this:
Style at Home - November 2011 - pg 108
Style at Home - November 2011 - pg 108
I loved one little aspect of the shot, and my plan to not decorate this year went flying out the window. Can you guess what part of the picture above inspired me? Since it's a little hard to tell from my scan here it is again:
Style at Home - Nov 2011 - White Dove
Style at Home - Nov 2011 - White Dove
Can you see it? It's the white felt dove Christmas ornament on the top right.

Once I spotted it, I knew I could make something similar, and all thoughts of being a complete Scrooge this Christmas went out the window. While they were a little time-consuming, they are very easy to make.

Here's what I used:
  • White felt
  • Pearl beads
  • Silver tulle
  • White craft feathers
  • Silver string
Craft supplies to make felt doves
What you'll need to make the doves

My first step was to find a pattern for a dove. that was easy enough using Google, and with it on my screen I free-handed the shape I wanted. There are three parts to the dove - the body, the wings, and the bottom.
My Dove Template
My Dove Template
I cut out my pattern, and then pinned it to my fabric. I cut out two body shapes, two wing shapes and one bottom shape in the felt, and two wings in the tulle.

Once the pieces were cut out I sewed the body together using a blanket stitch and then I stuffed the dove a little with some off cuts from the felt I was using to make my dove more three-dimensional.
Felt Dove sewn together

Once the bodies were put together I added the wings. I decided to add the piece of tulle over my felt wing to dress it up a little, but you could do it without. The wings are attached to the body with a couple of stitches at the top - this allows them to stand out from the body which I think looks more natural.
dove with wings added
I sewed on two pearl beads to make eyes, but I'm sure you could just use a little dab of glue.
Dove ornament with eyes added
Next, I took the craft feathers and decided on what length I wanted the tail to be. Once that was done I cut them, and then removed a little of the down from the quill to allow me to insert it easily into the dove. I used a little dab of glue to hold the feather in place.
making the feather tail for a dove ornament
My last step was to add the silver string. It turned out my string was too fat for my regular needle, but luckily I happened to have an upholstery needle with a big enough eye. All I did was use the needle to pull the string thought the top of the dove's body, and then tie a knot in the sting.

Here is the finished product:
My finished dove ornament
My finished dove ornament
Here is what this project cost (everything came from dollar stores):
  • White felt: $0 (I had it on hand from my bookend project)
  • Silver tulle: $1
  • Silver sting: $1
  • Craft Feathers: $1
  • Pearl beads: $1
  • Total Cost: $4 for 6 dove ornaments
I was going to just hang the doves, but I thought there should be something else on my tree, so I came up with what was the easiest project ever - it took about 5 minutes to make 15 ornaments.

What you'll need:
  • Small mirrors (I used round ones, but they also had squares and ovals)
  • some ribbon or string
  • some glue - I used a glue gun
    Small round mirrors
All I did was add a little dab of glue on the back of one mirror, stick in both ends of the small piece of string and lastly stick on the second piece of mirror.

Here is what they look like:
round mirror ornaments
Mirror Ornaments
Cost:
  • 2 packages of 15 mirrors: $2
  • Small spool of silver ribbon: $1
  • Total cost: $3 for 15 ornaments
I was going to put all my new ornaments on my regular tree, but on the way home from work today I found a tree branch, so decided to try to replicate my inspiration image a little more.
My twig Christmas tree
And here's a close up of my dove:
White Dove Christmas Ornament


I feel I have to apologize for the pictures in this post - I'm battling two difficulties - It's now dark here when I leave for work, and when I get home, so there's no opportunity to take pictures in natural light, and probably more importantly I have no photographic ability. Maybe Santa will be good to me and get me lessons;)

DIY

DIY - Dollarstore White Lion Bookends

September 22, 2011


Earlier this year I was exploring the aisles of my local Dollarama when I came across some rather interesting garden decorations in the form of lions. I liked the shape of them, but since I don't have a garden where they could sit proudly amongst the flowers I left them where they sat on the shelf. On my way home from the store I had what I consider a rather brilliant idea, and a day later returned and purchased two.

Pair of Lion garden statues
Dollarstore Garden Lions
For some time I'd been eying all those white ceramic animal book ends which seem to be everywhere recently, but hadn't yet managed to bite the bullet and buy some. In particular this owl set at Chapters had caught my eye.
Chapters Owl Bookends - $39.99
Chapters Owl bookends - $39.99

Anyway, my brilliant idea was to transform those somewhat regal dollar store garden decorations into a set of bookends.

My first step was to fill my garden statues with the river rock that I also got at Dollarama.
Filled with Dolalrstore river Rock

Once all the rock was inside I discovered that the rocks moved around a bit if I moved the lion, so I used paper towel to fill in some of the gaps and reduce movement. I sealed up the hole on the bottom of the lion with some thin cardboard from a box of frozen pizza.
Cover the holes with cardboard

Next up was painting. I decided that spray paint would be the easiest to apply. I mounted the lion on the painters pyramids I used during my first spray painting project. This allowed me to easily spray around the base of the lions. I did three coats of glossy white spray paint, letting it dry completely between coats.
Getting ready for spraypaint

The last step was to glue some white felt to the base of the bookends. This serves two purposes - it covers the unsightly cardboard, and it will also protect any surface I place the bookends on. I traced the base of the lions and then cut inside my pen mark to get pieces of felt that were slightly smaller than the base. I affixed it to the bottom of the lions with my glue gun.
Tracing the base on felt

I have to say that I'm quite pleased with the way that these turned out.
The finished lion Bookend
  • Two dollar store garden decorations: $4 at Dollarama
  • Two bags of dollar store river rock: $2 at Dollarama
  • White glossy spray paint: $5.49 at Home Depot
  • White felt: $1.02 at Fabricland - the location was closing, so it was 60% off $17/yd and I only bought 6.5".
For a total cost of $14.31 (tax. included) I think I made a really nice pair of DIY bookends.
Fred & George - the Lion bookends

I've decided to name them Fred and George - I'm sure you can guess why.

Antique

Framing a Memory

September 06, 2011

For my birthday last March my aunt J sent me a small antique Limoges mirror that had belonged to my Great Aunt Margaret. I really liked it, but for the life of me I couldn't figure out what to do with it - I'm not the type of girl who carries a mirror in her purse, and it was too pretty to be just tossed into my purse where it would disappear to the bottom and probably get damaged. That said - I also didn't want to store it away somewhere where nobody could admire it. 
Antique Limoges mirror
My birthday present - an antique Limoges mirror
It took me a while to figure out to do with the mirror, and once that was figured out, it took even longer to find a key component for my idea to work. The plan was to frame the mirror in a shadow-box type frame. Unfortunately I couldn't find exactly the type of frame I was looking for - I was looking for one where the glass was spaced about 1/2" away from the back of the frame - all the frames I found had no space, or they were true shadow boxes for mementos and the glass was a couple of inches from the back of the frame.

After some fruitless searching at all the big box stores (and some little box ones as well), I finally found what I was looking for in a thrift store. My new frame cost $6 which, let's be honest is a little steep for a thrift store, but it was just what I was looking for.
thrift store picture frame
I decided that I was going to hang my mirror in the bathroom, so one of the first steps after completely dismantling the frame, cleaning, and then re-assembling it was to spray paint it silver to match the chrome accents in my bathroom. This was my first experience with spray paint, and quite a bit easier than I had thought.
Frame taped off before spray painting

I taped off the glass on the front a back, and set the frame on some 'Painter's pyramids' I had bought for another project but not used. I set the entire thing in a big cardboard box to spray as I was doing it inside (I don't have a garage or outside space that's solely mine).
A square frame spray painted silver

I decided that I would back the mirror with black velvet, but I needed to figure out a way to mount the mirror on the velvet. Two sided tape was out as it could potentially damage the mirror, but luckily the mirror was framed with a rope pattern that was constructed in such a way to leave tiny holes around the mirror. Using a beading needle and some clear thread I sewed the mirror onto the velvet using the tiny holes in the rope pattern to secure the mirror to the fabric.
mirror sewed on to black velvet
I then mounted the velvet on some thin cardboard (from a frozen pizza) using spray adhesive and placed it in the frame. I then added a piece of thicker cardboard to ensure the mirror was positioned securely in the frame and anchored it all in place using the original nails. Using spray adhesive I glued a piece of brown paper to the back of the frame to neaten up the back, and also to help keep out any dust. My last step was to add a small label identifying the mirror.
Dedication lable on back of picture frame

Here's the finished product:
Newly frames Limoges mirror

Here is the cost breakdown of the project:
  • Thrift store frame: $6
  • Velvet fabric: $6 - King Textiles - $14.00/yd. and it was 20% off
  • Needles and thread: $2.01  - Fabricland - the location was closing so it was 50% off
  • Spray paint: $7.19
  • Painter's pyramids: $6.80 (I bought mine at Lee Valley, but Amazon has them too)
For a total cost of about $30 (tax. included) I think I got a pretty good result.

recent posts

Like us on Facebook

Follow us on Pinterest

//]]>